BT100-1F - Dispensing Peristaltic Pump-Dispensing Type-Longer Precision Pump Co., Ltd.

Product Features Product Specifications Product Videos Related Articles Related Files

Applications：

Suitable for laboratory, analytical instrument, industry.

Product Instruction：

Dispensing peristaltic pump BT100-1F has LCD, which could display the parameters and running state. The pump could run continuously at desired flow rate and speed, and also could complete the dispensing function at desired dispensing volume, dispensing time and batch cycles. The flow rate calibration and dispensing calibration ensure the high accuracy and precision. The pump offers flow rate from 0.0002 mL/min to 500mL/min. And the dispensing volume is from 0.01mL to 9990mL. The pump could be controlled through control panel, external control interface and RS485 communication interface.
CE certified product based on request.

Main Functions and Features

- Applicable pump heads: YZ1515X, YZII15, YZ2515X, YZII25, DG-1/DG-2
- Micro flow rates transferring: The smallest flow rate can reach 0.2 μL/min
- Dispensing function: dispense the fluid at desired volume, dispensing time and batch cycles.
- Back suction function: 0s - 99.9min, resolution is 0.1s
- Operating mode: Membrane keypad and rotary encoded switch
- Speed control: The speed can be adjusted manually or automatically through external control interface

- Prime key: For fast filling and emptying at full speed

- Power-off memory: Return to previous state when power on

- Calibration function: The flow rates and the dispensing volume can be calibrated to increase the accuracy
- Communication function: the pump could be controlled by computer through RS485 communication interface.

Technical Specifications

- Speed: 0.1-100 rpm, CW/CCW

- Speed resolution: 0.1 rpm

- Control mode: Control panel, external signal control and communication control are available

- Display: LCD for running state

- Dispensing volume: 0.01 mL to 9.99 L

- Copy number: 0 to 9999, 0 means unlimited cycle.

- Pause time: 0.1s-99.9 min, resolution is 0.1s

- Exteranl control: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz corresponding to 0.1-100 rpm)

- Speed output: 10Hz - 10kHz corresponding to 0.1 - 100 rpm

- Start/stop output: OC gate signal

- Direction output: OC gate signal

- Communication interface: RS485

- Power: AC90V - AC260V

- Power consumption: < 40W
- Operating condition: Temperature 0 to 40°C, Relative humidity < 80%
- Dimensions (L × W × H): 285 × 207 × 180 (mm)
- Drive Weight: 3.8 kg
- IP rating: IP 31

Other parameters

Drive (Product Code)	Pump head	Tubing	Flow Rate ( */min)	Weight (kg)
BT100-1F-B (05.02.13B，English)	YZ1515x,YZII15	13# 14# 19# 16# 25# 17# 18#	7 μL - 380 mL	4.2
	YZ2515x	15# 24#	0.17 mL - 267 mL
	YZII25	15# 24# 35# 36#	0.17 mL - 500 mL
	DG-1, DG-2, DG-4 (6 Rollers, 10 Rollers)	Wall Thickness: 0.8 - 1.0 (mm) Inner Diameter: ≤3.17 mm	0.2μL - 32ml (Single channel for 10 rollers)	4.0 - 4.2
	DG-1, DG-2, DG-4 (6 Rollers, 10 Rollers)	Wall Thickness: 0.8 - 1.0 (mm) Inner Diameter: ≤3.17 mm	0.25 μL- 48 ml (Single channel for 6 rollers)	4.0 - 4.2

BT100 1F Peristaltic Pump Dispensing Calibration

BT100 1F Peristaltic Pump Dispensing Demo

BT100-1F Peristaltic Pump Flow Rate Calibration

BT100-1F Peristaltic Pump Back Suction Demo

dPOFLEX Explosion Proof Motor Pump Inverter Connec

Communication Function for BT100-1F

BT100-1F can connect to the control computer (computer, PLC, SCM) through RS485 serial communication interface. Max. 30 pumps can be controlled by a control computer

2016-12-16

How to use External Control Model for BT100-1F

External Control Input *Communication Control The pump can connect to control computer (computer, PLC, SCM) through RS485 serial communication module (shown as below).

2016-12-16

BT100-1F - Dispensing Peristaltic Pump Operation Procedure

Select pump head and tubing refer to “Suitable Pump head, Tubing, Ref. Flow Rate” table before working. Thick wall tubing is preferred for longer service life.

2016-12-16

BT100-1F Dispensing Volume Calibration

The parameters can not be changed under dispensing volume calibration operation. The defaulted parameters are the parameters set under Dispensing Setting

2016-12-16

BT100-1F Peristaltic Pump Calibration

Pump should be calibrated when flow rate or dispense volume is beyond the tolerance. Flow rate and dispensing volume can be calibrated separately in different application.

2016-12-16

BT100-1F Peristaltic Pump Dispensing Setting

Before dispensing process, the parameters including Pump Head, Tubing, Dispensing Volume, Copy number, Flow Rate and Pause time must be set. Dispensing Volume: the volume that the pump dispenses betwe...

2016-12-16

Tygon A-60-F Peristaltic Pump Tubing for LongerPump

ygon® A-60-F peristaltic pump tubing is ideal for use in clean-in-place and steam-in-place Peristaltic Pump BT100-2J, BT300-2J, BT100-1F, BT300-1F, etc. It is compatible with virtually all commercial...

2016-11-29

Suitable Peristaltic Pump Tubing for Dispensing Peristaltic Pump

2015-12-19

Longer Industrial Peristaltic Pump Gx00-1L Brochure Download
Longer dPOFLEX® Peristaltic Pump Head BPH01 Brochure Download
dPOFLEX BP02/GP02 Brochure Download
EP02 Pump Speed vs Input Frequency Download
dPOFLEX EP02 Datasheet Download
Peristaltic pump LVD CE Certificate Download
Peristaltic pump ECD CE Certificate Download
BT100-1F - Dispensing Peristaltic Pump Download

Email：

Unit / Name：