Technical Articles

• Dispensing & Filling System FB16-1 Peristaltic Pump System Configuration

  06/02/2017

  Each unit has four channels. With modular structure, one controller can control one to four units. The system is configured with DMD15-13 low pulse pump head, which will improve the dispensing accurac...

• Dispensing & Filling System FB16-1 External Control Wiring

  02/13/2017

  External Control Signal Control Set the control mode as “external control”, refer to 3.2.1 Set user start signal as empty node. External control signal cable definition:

• Dispensing & Filling System FB16-1 Peristaltic Pump Wire the System

  02/13/2017

  Power cord: Connect system to power supply with power cord. Controller cable: Connect controller and drive unit to transfer data and provide power to controller. Power interlink cable and data interli...

• FB16-1 Functions & Specifications Description

  02/13/2017

  Dispensing mode: Timing internal, signal external, communication external controls are available to match different requirement. Timing internal control mode: Dispensing volume according to the progra...

• Dispensing & Filling System FB16-1 Peristaltic Pump Controller Panel Description

  02/13/2017

  l Controller panel include sixkey.l Each key will have different functions underdifferent interface and displayed in the information bar on the LCD.l Adopt 320*250 colorful LCM modules for LCD ofsyst...

• FK1-100Z External Control Interface Definition

  02/13/2017

  Low level of control signal is valid. 1. Filling-stop without bottles signal for Channel 1; 2. Filling-stop without bottles signal for Channel 2; 3. Filling-stop without bottles signal for Channel 3; ...

• FK1-100Z Single Channel Testing Operation in Test Mode

  02/13/2017

  Filling volume calibration is needed after changing the filling volume. Calibration operation of each channel is repeatable.

• FK1-100Z Dispensing and Filling System Set Back Suction Time

  02/13/2017

  Step 1: In running interface (interface 1 or interface 2), press Rotary Coded Switch to enter parameters setting interface (interface 3); Step 2: Turn the Rotary Coded Switch to highlight “3. Back Su...

• FK1-100Z Dispensing and Filling System Set Filling Time

  02/13/2017

  Step 1: In running interface (interface 1 or interface 2), press Rotary Coded Switch to enter parameters setting interface (interface 3); Step 2: Turn the Rotary Coded Switch to highlight “2.Filling ...