Technical Support
- Peristaltic Pump ＞
- OEM Pump ＞
- Syringe Pump ＞
- Micro Piston Pump ＞
- Pump System ＞
- Other Pump ＞
How to use Footswitch for BT100-1L
Release Time：2016-12-09
Set footswitch working mode.
1. Gated: The pump runs as long as the footswitch is pressed.
2. Trigger: Press footswitch, the pump starts running; Press footswitch again, the pump stops.
In “Footswitch” interface, press the Adjusting Knob to enter footswitch setting interface. Turn the Adjusting Knob to select the corresponding state. Press the Adjusting Knob to save and quit. Press the Exit Key to cancel the setting and return to“Footswitch” interface.
Note:
When the pump connects the footswitch, the on
operating panel is invalid no matter the remote control is on or off.
1. Gated: The pump runs as long as the footswitch is pressed.
2. Trigger: Press footswitch, the pump starts running; Press footswitch again, the pump stops.
In “Footswitch” interface, press the Adjusting Knob to enter footswitch setting interface. Turn the Adjusting Knob to select the corresponding state. Press the Adjusting Knob to save and quit. Press the Exit Key to cancel the setting and return to“Footswitch” interface.
Note:
When the pump connects the footswitch, the on
operating panel is invalid no matter the remote control is on or off.
