Main Functions and Features
- Parameters Setting: The parameters of each channel can be different.
- Running Control: Each drive unit can be controlled separately, or four drive units can be controlled to run simultaneously or run at different time
- Channel Copy: All drive units can be run according to the parameters of one drive units of them
- Delaying Startup: Delaying startup time of each channel can be controlled separately
- Memory Function: Select resume operation or remain stopped when power turns after an interruption
- Block Protection: When one drive unit stops accidently, the system will warm and stop
- Working Mode: TS-1A/L0107-1A - Infusion; TS-2A/L0107-2A - infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuours
- External Control: Start/stop input control signal which is pulse mode to switch the states of start and stop
- Communication: Realize computer control through RS485 communication interface
Main Functions for Each Channel
- Syringe Selection: The syringe can be selected in the manufacture table which includes manufacturer, material and size
- User-Defined Glass Syringe: Save 4 inner diameter of user-defined glass syringe barrel
- Parameters Setting: Set dispensing volume, infusion time, pause time and copy number
- Display Mode Selection: Different parameters (column, flow rate, linear speed)can be selected in the main display inter face
- Fast Forward & Fast Reverse: Infusion at the max. speed
- Calibration: Acquire accurate volume through calibration
Technical Specifications
- Max. Infusion Distance: 70 mm
- Acceptable Glass Syringe : 5 µL - 1000 µL
- Linear Speed: 7.9 µm/min - 79.4 mm/min
- Adjusting Resolution: 7.9 µm/min
- Distance Resolution: 0.165 µm
- Linear Force: > 20 N
- Setting Mode: Membrane keypad and rotary coded switch
- Accuracy: < +/- 0.5% error in the condition of > 30% of max. infusion distance
- Display: 128 x 64 graphic LCD
- External Control: Start/Stop control, fast forward control, fast reverse control
- Communication Interface: RS 485
- Power: AC 100 V - 240 V or DC 12 V
- Power Consumption: < 40 W
- Operating Condition: Temperature 0 - 40 °C
- Relative Humidity < 80 %
- Controller Dimensions (L x W x H): 170 x 108 x 65 (mm)
- Controller Weight: 0.8 Kg
- Drive Unit Dimensions (L x W x H): 180 x 46 x 78 (mm)
- Drive Unit Weight: 0.6 Kg
- IP Rating: IP 21
