Technical Support
- Peristaltic Pump ＞
- OEM Pump ＞
- Syringe Pump ＞
- Micro Piston Pump ＞
- Pump System ＞
- Other Pump ＞
Peristaltic Pump Tubing life Comparison
Release Time：2015-12-19
The table blow depicts hours until failure of 1/4” I.D. × 3/8”O.D. tubing in each corresponding formulation. In each case, a 3-rollers pump head was utilized operating at 600 rpm under room temperature (22℃). Tubing failure is measured in hours of use prior to rupture.
The performance of tubing in peristaltic pumping applications is affected by the conditions of use and equipment, along with size and wall thickness of the tubing tested. The data above is presented for the information only and should not be utilized for specification purposes.
Important: Baoding Longer Precision Pump Co., Ltd. does not assume any responsibility or liability for any advice furnished by it, for the performance or results of any installation or use of the product or of any final product into which the product may be incorporated by the purchaser and/or user.
It is the user’s responsibility to ensure the suitability and safety of tubing for all intended uses. Laboratory, field or clinical tests must be conducted in accordance with applicable requirements in order to determine the safety and effetiveness for use of tubing in any particular application.
The performance of tubing in peristaltic pumping applications is affected by the conditions of use and equipment, along with size and wall thickness of the tubing tested. The data above is presented for the information only and should not be utilized for specification purposes.
Important: Baoding Longer Precision Pump Co., Ltd. does not assume any responsibility or liability for any advice furnished by it, for the performance or results of any installation or use of the product or of any final product into which the product may be incorporated by the purchaser and/or user.
It is the user’s responsibility to ensure the suitability and safety of tubing for all intended uses. Laboratory, field or clinical tests must be conducted in accordance with applicable requirements in order to determine the safety and effetiveness for use of tubing in any particular application.
