Housing material

Cast aluminum

304sst

Speed range

1rpm-300rpm, CW/CCW

Speed resolution

0.1rpm

Display

3.5 inch LCD, Chinese or English

Clock function

Clock can be set for log record, and displayed on the running screen

Work mode

Flow rate mode, dispensing mode, calibration mode

Flow rate mode

Pump runs continuously at the set flow rate, and displays flow rate and pump speed on the screen

Flow rate setting range

1.0mL/min-9.0L/min  (depends on pump head and tubing) 

Dispensing mode

Pump repeats the dispensing at set volume, cycles, interval time and back suction parameter, and displays single volume, total volume, dispensed cycles/target cycles on screen

Volume of single

dispense

1.0mL-225VL (depends on pump head and tubing)

Dispensing cycles

1-9999 and unlimited

Interval time

1s-9999s

Calibration function

Improve the flow rate and dispensing volume accuracy

Control mode

Keypad control, external signal control, communication control and foot switch control

Communication control

Interface: RS485, Profibus(optional)

Protocol: Modbus RTU, Profibus DP(optional)

Interface: RS485, Industrial Ethernet(optional)

or Profibus(optional)

Protocol: Modbus RTU, Modbus TCP/IP(optional),

Profibus DP (optional)

External control

Speed control signal: 0-5V, 0-10V, 0-10kHz, 4-20mA   Start/stop, direction control: 5V-24V logic level signal or relay signal (dry contact)

Status output

Running/stop, fault status: relay signal (dry contact)

Pump Speed: frequency signal

Running/stop, fault status: relay signal (dry contact)

Compressed tubing

detection

Pump will automatically stop when it detects the tubing is not compressed well, 

and an alarm message will be promoted. The function can be enabled and disabled. 

Actual flow rate

measurement

Measure and display the flow rate by connecting ultrasonic flow meter (optional)

Fluid pressure

measurement

Measure and display the fluid pressure inside the tubing by connecting pressure sensor (optional)

Pump status when

power on

Pump stops or runs in the flow rate mode. Pump stops in the dispensing mode

Keypad lock function

Enable the keypad lock function to lock the keypad automatically after 20s standby, (start/stop key will not be locked)

User access control

Three levels of user accesses (administrator, technician, operator)

Electronic signature

and audit trail

Meets the requirement of FDA  21CFR  Part 11

Log record

Record 90 days operation Logs, and can be exported directly

Dimension(LxWxH)

215 x 358 x 243mm (drive only)

215 x 362 x 258mm (drive only)

Power supply

AC100-240V/115W   50/60Hz

Operating condition

Temperature: 5℃-40℃, relative humidity≤100%

IP rating

IP66

Weight (drive only)

≤ 10.4kg

≤ 10.5kg

dPOFLEX® GP02(05.02.83A)

dPOFLEX® BP02(05.02.84A)

YZ35-13

3

26^#

2

73^#

4

82^#

6.5

82A^#

8

KZ35-13

3

26^#

2

73^#

4

82^#

6.5

184^#

9