Pump speed

0-100rpm

Speed resolution

0.1rpm

Modbus protocol: 0.01rpm

Longer OEM protocol：0.1rpm

Running direction control

Pump running direction is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for clockwise, contact closed for counterclockwise.

Communication control commands

Start/stop control

Start/stop is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for start, contact closed for stop.

Communication control commands

DIP switch setting for pump speed

The DIP switch can set the pump speed to 0-100rpm, and each DIP position corresponds to a step of 5rpm.

-

External signals for pump speed

The pump speed will be proportional to the external speed signal: 4-20mA, 0-5V, 0-10V, 0-10kHz. The relationship between the signal range and speed range can be configured through communication commands.

Communication control commands

Communication parameters

-

Baud rate：1200bps, 9600bps, 19200bps, 115200bps

Parity：None or Even

Pump address：1-32

Stop bit：1 bit

Output

DC5V 100mA

Power supply

DC24V/10W

Dimensions(L*W*H)

85mmx85mmx134mm

Mounting method

Panel mount

Working condition

Temperature: 0℃-40℃, relative humidity＜80%

Weight

0.9kg

TH15-12-A(included)

13#

7

14#

22

19#

50

16#

80

25#

167